Proximity keypads - KP series
- Use with Switch2 or Net2
- Keypad and proximity reader all in one
- Read range up to 100mm with PROXIMITY cards
- Easy mounting
- Supplied with a choice of black or white bezels
- Low profile - less than 16mm deep
- 2 sizes
Installation - The reader is wired as shown on the control unit label. Be sure to avoid mounting on metal surfaces or near other proximity readers as this will affect the read range. The cable exits centrally from the back of the reader making drilling and mounting very accurate.
Operation - A token is read by holding it within close proximity of the reader. Once a token has been read if the reader has been configured for code/PIN this must then be entered using the keypad. The control unit verifies the information and grants or denies access as appropriate. If access is granted the green LED flashes. If access is denied the red LED flashes.